Search for: All records

This NSF-IUSE exploration and design project began in Fall 2018 and features cross-disciplinary collaboration between engineering, math, psychology, and math education faculty to develop learning activities with 3D-printed models for integral calculus and engineering statics. We are exploring how such models can scaffold spatial abilities and support learners’ development of conceptual understanding and representational competence. The project is addressing these questions through parallel work piloting model-based learning activities in the classroom and by investigating specific attributes of the activities in lab studies and focus groups. To date we have developed and piloted a mature suite of activities covering a variety of topics for both calculus and statics. After a year of classroom implementation and data collection at the institution where the curriculum was developed, the project team recruited math and engineering faculty from three other colleges to pilot the models starting Fall 2020. The goal of this expansion was to increase sample sizes and diversity for statistical analysis of classroom data and to learn about the experiences of faculty as they integrated the curriculum materials into their own courses. The original vision was for faculty to use the models in face-to-face instruction, but the transition to online modality in response to the COVID-19 pandemic forced a rapid pivot during this expansion that we reported on previously. Faculty participants who chose to continue with the project worked to incorporate the models in parallel with their respective efforts to adapt to online teaching. This poster focuses on the experiences of the participating math faculty. Ultimately these faculty taught online calculus courses both with and without the models from Fall 2020 through Spring 2022. We conducted pre and post participation interviews and report on their experiences. All participants reported their intention to continue to use the models beyond conclusion of the project and planned to try them in face-to-face instruction. The paper will discuss more details about the interview findings and conclude by making some recommendations for others who may be interested in exploring the use of hands-on models in Calculus instruction. 

Abstract This paper describes the results from an ongoing project where hands-on models and associated activities are integrated throughout an undergraduate statics course with the goal of deepening students’ conceptual understanding, scaffolding spatial skills, and therefore developing representational competence with foundational concepts such as vectors, forces, moments, and free-body diagrams. Representational competence refers to the fluency with which a subject expert can move between different representations of a concept (e.g. mathematical, symbolic, graphical, 2D vs. 3D, pictorial) as appropriate for communication, reasoning, and problem solving. This study sought to identify the characteristics of modeling activities that make them effective for all learners. Student volunteers engaged in individual interviews in which they solved problems that included 2D diagrams, 3D models, and worked calculations. Participating students had prior experience with the models and related activity sheets earlier in the course. Data was collected at the end of the quarter and the activities emphasized conceptual understanding. Thematic analysis was used to develop codes and identify themes in students’ use of the models as it relates to developing representational competence. Students used the models in a variety of ways. They wrote directly on the models, touched and gestured with the model, adjusted components, and observed the model from multiple orientations. They added new elements and deconstructed the models to feel the force or imagine how measurements would be impacted if one parameter was changed while all others held constant. In interviews students made connections to previous courses as well as previous activities and experiences with the models. In addition to using the 3D models, participants also used more than one representation (e.g. symbolic or 2D diagram) to solve problems and communicate thinking. While the use of models and manipulatives is commonplace in mechanics instruction, this work seeks to provide more nuanced information about how students use these learning aids to develop and reinforce their own understanding of key concepts. The authors hope these findings will be useful for others interested in designing and refining hands-on mechanics activities toward specific learning goals. 

Mechanics instructors frequently employ hands-on learning with goals such as demonstrating physical phenomena, aiding visualization, addressing misconceptions, exposing students to “real-world” problems, and promoting an engaging classroom environment. This paper presents results from a study exploring the importance of the “hands-on” aspect of a hands-on modeling curriculum we have been developing that spans several topics in statics. The curriculum integrates deep conceptual exploration with analysis procedure tutorials and aims to scaffold students’ development of representational competence, the ability to use multiple representations of a concept as appropriate for learning, problem solving, and communication. We conducted this study over two subsequent terms in an online statics course taught in the context of remote learning amidst the COVID-19 pandemic. The intervention section used a take-home adaptation of the original classroom curriculum. This adaptation consisted of eight activity worksheets with a supplied kit of manipulatives and model-building supplies students could use to construct and explore concrete representations of figures and diagrams used in the worksheets. In contrast, the control section used activity worksheets nearly identical to those used in the hands-on curriculum, but without the associated modeling parts kit. We only made minor revisions to the worksheets to remove reference to the models. The control and intervention sections were otherwise identical in how they were taught by the same instructor. We compare learning outcomes between the two sections as measured via pre-post administration of a test of 3D vector concepts and representations called the Test of Representational Competence with Vectors (TRCV). We also compare end of course scores on the Concept Assessment Test in Statics (CATS) and final exam scores. In addition, we analyze student responses on two “multiple choice plus explain” concept questions paired with each of five activities covering the topics of 3D moments, 3D particle equilibrium, rigid body equilibrium (2D and 3D), and frame analysis (2D). The mean pre/post gain across all ten questions was higher for the intervention section, with the largest differences observed on questions relating to 3D rigid body equilibrium. Students in the intervention section also made larger gains on the TRCV and scored better on the final exam compared to the control section, but these results are not statistically significant perhaps due to the small study population. There were no appreciable differences in end-of-course CATS scores. We also present student feedback on the activity worksheets that was slightly more positive for the versions with the models. 

Mechanics instructors frequently employ hands-on learning with goals such as demonstrating physical phenomena, aiding visualization, addressing misconceptions, exposing students to “real-world” problems, and promoting an engaging classroom environment. This paper presents results from a study exploring the importance of the “hands-on” aspect of a hands-on modeling curriculum we have been developing that spans several topics in statics. The curriculum integrates deep conceptual exploration with analysis procedure tutorials and aims to scaffold students’ development of representational competence, the ability to use multiple representations of a concept as appropriate for learning, problem solving, and communication. We conducted this study over two subsequent terms in an online statics course taught in the context of remote learning amidst the COVID-19 pandemic. The intervention section used a take-home adaptation of the original classroom curriculum. This adaptation consisted of eight activity worksheets with a supplied kit of manipulatives and model-building supplies students could use to construct and explore concrete representations of figures and diagrams used in the worksheets. In contrast, the control section used activity worksheets nearly identical to those used in the hands-on curriculum, but without the associated modeling parts kit. We only made minor revisions to the worksheets to remove reference to the models. The control and intervention sections were otherwise identical in how they were taught by the same instructor. We compare learning outcomes between the two sections as measured via pre-post administration of a test of 3D vector concepts and representations called the Test of Representational Competence with Vectors (TRCV). We also compare end of course scores on the Concept Assessment Test in Statics (CATS) and final exam scores. In addition, we analyze student responses on two “multiple choice plus explain” concept questions paired with each of five activities covering the topics of 3D moments, 3D particle equilibrium, rigid body equilibrium (2D and 3D), and frame analysis (2D). The mean pre/post gain across all ten questions was higher for the intervention section, with the largest differences observed on questions relating to 3D rigid body equilibrium. Students in the intervention section also made larger gains on the TRCV and scored better on the final exam compared to the control section, but these results are not statistically significant perhaps due to the small study population. There were no appreciable differences in end-of-course CATS scores. We also present student feedback on the activity worksheets that was slightly more positive for the versions with the models. 

This NSF-IUSE exploration and design project began in fall 2018 and features cross-disciplinary collaboration between engineering, math, and psychology faculty to develop learning activities with hands-on models and manipulatives. We are exploring how best to design these activities to support learners’ development of conceptual understanding and representational competence in integral calculus and engineering statics, two foundational courses for most engineering majors. A second goal is to leverage the model-based activities to scaffold spatial skills development in the context of traditional course content. As widely reported in the literature, well-developed spatial abilities correlate with student success and persistence in many STEM majors. We provided calculus students in selected intervention sections taught by four instructors at three different community colleges with take-home model kits that they could reference for a series of asynchronous learning activities. Students in these sections completed the Purdue Spatial Visualization Test: Rotations (PSVT:R) in the first and last weeks of their course. We also administered the assessment in multiple control sections (no manipulatives) taught by the same faculty. This paper analyzes results from fall 2020 through fall 2021 to see if there is any difference between control and intervention sections for the courses as a whole and for demographic subgroups including female-identifying students and historically-underserved students of color. All courses were asynchronous online modality in the context of the COVID-19 pandemic. We find that students in intervention sections of calculus made slightly larger gains on the PSVT:R, but this result is not statistically significant as a whole or for any of the demographic subgroups considered. We also analyzed final course grades for differences between control and intervention sections and found no differences. We found no significant effect of the presence of the model-based activities leading to increased PSVT:R gains or improved course grades. We would not extend this conclusion to face-to-face implementation, however, due primarily to the compromises made to adapt the curriculum from in-person group learning to asynchronous individual work and inconsistent engagement of the online students with the modeling activities. 

This NSF-IUSE exploration and design project began in fall 2018 and features cross-disciplinary collaboration between engineering, math, and psychology faculty to develop learning activities with hands-on models and manipulatives. We are exploring how best to design these activities to support learners’ development of conceptual understanding and representational competence in integral calculus and engineering statics, two foundational courses for most engineering majors. A second goal is to leverage the model-based activities to scaffold spatial skills development in the context of traditional course content. As widely reported in the literature, well-developed spatial abilities correlate with student success and persistence in many STEM majors. We provided calculus students in selected intervention sections taught by four instructors at three different community colleges with take-home model kits that they could reference for a series of asynchronous learning activities. Students in these sections completed the Purdue Spatial Visualization Test: Rotations (PSVT:R) in the first and last weeks of their course. We also administered the assessment in multiple control sections (no manipulatives) taught by the same faculty. This paper analyzes results from fall 2020 through fall 2021 to see if there is any difference between control and intervention sections for the courses as a whole and for demographic subgroups including female-identifying students and historically-underserved students of color. All courses were asynchronous online modality in the context of the COVID-19 pandemic. We find that students in intervention sections of calculus made slightly larger gains on the PSVT:R, but this result is not statistically significant as a whole or for any of the demographic subgroups considered. We also analyzed final course grades for differences between control and intervention sections and found no differences. We found no significant effect of the presence of the model-based activities leading to increased PSVT:R gains or improved course grades. We would not extend this conclusion to face-to-face implementation, however, due primarily to the compromises made to adapt the curriculum from in-person group learning to asynchronous individual work and inconsistent engagement of the online students with the modeling activities. 

This NSF-IUSE exploration and design project began in fall 2018 and features cross-disciplinary collaboration between engineering, math, and psychology faculty to develop learning activities with 3D-printed models, build the theoretical basis for how they support learning, and assess their effectiveness in the classroom. We are exploring how such models can scaffold spatial skills and support learners’ development of conceptual understanding and representational competence in calculus and engineering statics. We are also exploring how to leverage the model-based activities to embed spatial skills training into these courses. The project’s original focus was on group learning in classroom activities with shared manipulatives. After a year of development and pilot activities, we commenced data collection in classroom implementations of a relatively mature curriculum starting fall 2019. Data collection ended abruptly in March 2020 when we had to shift gears in the context of a shift to online learning amid the COVID-19 pandemic. With uncertainty as to when the use of shared hands-on models in a collaborative in-person learning context would be feasible again, it was clear a change in approach would be necessary. We have since developed new versions of the models and associated curriculum designed for independent at-home use in the context of online learning. We implemented the new curricula in an online statics courses in fall 2020 and in multiple sections of online calculus courses in winter 2021. In this paper, we describe our strategies for implementing hands-on learning at home. We also present some example activities and compare the approach to the face-to-face versions. Finally, we compare student feedback results on the online activities to analogous feedback data from the classroom implementations and discuss implications for the anticipated return to face-to-face learning in the classroom. 

A growing body of research indicates spatial visualization skills are important to success in many STEM disciplines, including several engineering majors that rely on a foundation in engineering mechanics. Many fundamental mechanics concepts such as free-body diagrams, moments, and vectors are inherently spatial in that application of the concept and related analytical techniques requires visualization and sketching. Visualization may also be important to mechanics learners’ ability to understand and employ common mechanics representations and conventions in communication and problem solving, a skill known as representational competence. In this paper, we present early research on how spatial abilities might factor in to students’ conceptual understanding of vectors and associated representational competence. We administered the Mental Cutting Test (MCT), a common assessment of spatial abilities, in the first and last week of the term. We also administered the Test of Representational Competence with Vectors (TRCV), a targeted assessment of vector concepts and representations, in week one and at mid-term. The vector post-test came after coverage of moments and cross products. We collected this assessment data in statics courses across multiple terms at three different colleges. To understand how spatial skills relate to the development of representational competence, we use a multiple regression model to predict TRCV scores using the pre-class MCT scores as well as other measures of student preparation in the form of grades in prerequisite math and physics coursework. We then extend the analysis to consider both MCT and TRCV scores as predictors for student performance on the Concept Assessment Test in Statics. We find that spatial abilities are a factor in students’ development of representational competence with vectors. We also find that representational competence with vectors likely mediates the importance of spatial abilities to student success in developing broader conceptual understanding in statics. We conclude by discussing implications for mechanics instruction. 

In teaching mechanics, we use multiple representations of vectors to develop concepts and analysis techniques. These representations include pictorials, diagrams, symbols, numbers and narrative language. Through years of study as students, researchers, and teachers, we develop a fluency rooted in a deep conceptual understanding of what each representation communicates. Many novice learners, however, struggle to gain such understanding and rely on superficial mimicry of the problem solving procedures we demonstrate in examples. The term representational competence refers to the ability to interpret, switch between, and use multiple representations of a concept as appropriate for learning, communication and analysis. In engineering statics, an understanding of what each vector representation communicates and how to use different representations in problem solving is important to the development of both conceptual and procedural knowledge. Science education literature identifies representational competence as a marker of true conceptual understanding. This paper presents development work for a new assessment instrument designed to measure representational competence with vectors in an engineering mechanics context. We developed the assessment over two successive terms in statics courses at a community college, a medium-sized regional university, and a large state university. We started with twelve multiple-choice questions that survey the vector representations commonly employed in statics. Each question requires the student to interpret and/or use two or more different representations of vectors and requires no calculation beyond single digit integer arithmetic. Distractor answer choices include common student mistakes and misconceptions drawn from the literature and from our teaching experience. We piloted these twelve questions as a timed section of the first exam in fall 2018 statics courses at both Whatcom Community College (WCC) and Western Washington University. Analysis of students’ unprompted use of vector representations on the open-ended problem-solving section of the same exam provides evidence of the assessment’s validity as a measurement instrument for representational competence. We found a positive correlation between students’ accurate and effective use of representations and their score on the multiple choice test. We gathered additional validity evidence by reviewing student responses on an exam wrapper reflection. We used item difficulty and item discrimination scores (point-biserial correlation) to eliminate two questions and revised the remaining questions to improve clarity and discriminatory power. We administered the revised version in two contexts: (1) again as part of the first exam in the winter 2019 Statics course at WCC, and (2) as an extra credit opportunity for statics students at Utah State University. This paper includes sample questions from the assessment to illustrate the approach. The full assessment is available to interested instructors and researchers through an online tool.